ACTi ACM-5611 1.3 Day Night Megapixel IP Security Camera

ACM-5611

19,100.00 บาท

ACTi ACM-5611 Main Features:
1.3M Megapixel resolution supported
Micron Progressive Scan SuperCMOS
Superior low-light w/ True Day Night Function
Built in f4.2mm / F1.8 Megapixel lens
MPEG-4 SP / MJPEG compression supported
Up to 8 FPS at 1280x1024 resolution
Two-way audio supported
Power over Ethernet PoE (IEEE 802.3af) supported

ACTi ACM-5611 Specifications:
Image Sensor: 1/3 Micron Progressive Scan SuperCMOS
Effective Pixels: 1280 x 1024
Day/Night Functions: Mechanical IR Cut Filter
Min. Illumination:
 - Color: 0.5 Lux at F1.8 (30 IRE,MAX AGC)
 - B/W: 0.05 Lux at F1.8 (30 IRE,MAX AGC)
 - CDS Sensor: Yes
 - IR Sensitivity: from 700nm to 1100nm
Lens Mount: C /CS (with adaptor)
Lens Included: Megapixel Fixed 4.2mm / F1.8
Motion Detection: Yes (3 Windows)
Electronic Shutter: 1/10 ~ 1/2,000 sec. (60Hz); 1/10 ~ 1/2,000 sec. (50Hz)
Flickerless: 1/120 sec. (60Hz); 1/100 sec. (50Hz)
BLC: Yes
AGC: Automatic (User defined)
White Balance: 6 modes (AUTO, Indoor1, Indoor2, Outdoor1, Outdoor2, Hold Current, Manual)
S/N Ratio: Better than 44 dB
Compression: MPEG-4 SP, MJPEG selectable
Picture Resolution: SXGA (1280x1024); HD 720 (1280x720); VGA
(640x480)
Image Frame Rate: Up to 8 fps at SXGA Res.; Up to 10 fps at HD720 Res.; Up to 30 fps at VGA Res.
Audio Input:
 - Compression: 8 kHz, Mono, PCM
 - Audio Line Input: Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Jack
Audio Output:
 - Compression: 8 kHz, Mono, PCM
 - Audio Line Output: Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Jack
Alarm:
 - Digital Input: 1, terminal block
 - Transistor Ouput 1, terminal block
Network Ethernet:
 - Ethernet(10/100Base-T), RJ-45 connector
Network Protocol:
 - TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP
 - SMTP, DNS, DDNS, NTP, ICMP, IGMP, ARP, 3GPPr
Software:
 - Web Browser: Microsoft Internet Explorer 6.0 or above
 - SDK: ActiveX control, C SDK
 - Security: Password protection: configured by the administrator
Operating Temperature: 0 ºC ~ 50 ºC (32 ºF ~ 122 ºF)
Power:
 - Power Requirement: PoE (IEEE802.3af) with Class 3
 - Power Consumption: 3.3 W (DC 12 V); 4.3 W (PoE)
Physical Dimensions (WxHxD): 67 mm x 55 mm x 129.5 mm (2.64” x 2.17” x 5.10”)
Weight: 400 g (0.88 lb)